TP-CNR-MT2200 Toilet roll &Kitchen roll & Maxi roll paper Rewinding Machine
1. Model: TP-CNR-MT2200
2. Machine cylinders length: 2200 mm
3. Parent roll width: 1750~2150mm
4. Mechanical Speed / Rewinding Speed: 200 – 250 m / min
5. Processing capacity: 3~5 tons/8hours
6. Finished product Diameter: 90~ 250mm (tightness adjustable)
7. Perforation Length: 110mm fixed (Other size to be specified). (90~140mm by fixed gear wheel adjustable) ,(180~280 must be remove the upper 2 knives)
8. Paper Core Diameter: 40mm≤φ≤76mm
9. Mechanical structure:
(1) Rectangular steel pipe welded with steel plate.
(2) Thickness of machine wall board is 25mm, process by numerical CNC.
(3) Four pieces of perforation blades, perforation blade shaft, rewinding roll, and guide roll all made of seamless steel pipe, which guarantee the less noise, less blade consumption and clear perforation effect.
(4) Perforation shaft adopts two line sprocket transmission, others adopt T-belt transmission drive.V
10. Paper Unwind Stand:
(1) Two independent drive unwind stand, with pneumatic parent roll lifting system
(2) Flat belt paper feeding, independent motor drive, inverter speed control, easy to suit to different paper tension
(3) With aluminum guiding roller
(4) Parent Roll Outside Diameter: Max 1200 mm
(5) Core inside Dia. of Parent Roll: 3” (76 mm)
11. Automatic tail trimming and sealing system
12. Automatic core feeding (alarming when core finish)
13. Coreless device
14. Equipped with PLC, HMI (Siemens brand)
15. Equipped with inverter speed control (INVT brand)
16. Main motor use Siemens brand
17. JOG and Emergency stop control
18. Installed Power: Main Motor: 7.5KW, Stand motor:2.2KW, Glue Motor: 550W
19. Air supply: 5KG/cm²Pa (6L/min) 0.6MPA, Air compressor user provide.
20. Required voltage: 3 phase 380V/50H
21. Machine size：15000*3250*2000mm （2 Stands + Rewinder）
22. Machine weight：about 14.0 tons
OPTION: Embossing unit (Steel to rubble with air control)
1． Specification：2200 embossing equipment
2． Machine cylinders length：2200mm
3． Max. parent roll width：2100mm
4． Rectangular steel pipe welded with steel plate
5． d=50mm Steel，Thickness of machine wall board is 50mm, process by numerical CNC
6． All use of synchronous belt and gear drive
7． Steel to rubber embossed, make the paper pattern shaped
8． Steel embossing cylinder diameter is 240mm, rubber cylinder diameter is 240mm, steel to rubber embossed with air control.
9． Independent motor drive and inverter speed control (Siemens Beide brand), HMI adjusts speed ratio to ensure synchronization between base paper and main machine after embossing.
10． Embossing design user provide
11． All aluminum tube paper guide roller
12． Operation speed：250m/min
13． Total power: P5.5KW
14． Air requires：Minimum pressure requirement 6KG/cm²Pa (Air compressor user provide), Gas consumption is 10L/min
15． Required voltage: 3 phase 380V/50HZ
23. Lamination unit –point to point embossing system for Kitchen towel
(1) Model: EL2000
(2) Cylinders length: 2000 mm
(3) Max. parent roll width: 1900mm
(4) Rectangular steel pipe welded with steel plate
(5) Thickness of machine wall board is 60mm, process by numerical CNC.
(6) Equipment using timing belts and gear drives
(7) Steel to rubber embossing with air control, 2pcs of Steel embossing cylinder，diameter ф372 mm，laser engraving embossing design, 2pcs of Rubber cylinder ф320mm, 1pcs of Metal roller and 1pcs of rubber roller
(8) Lamination with automatic separation when the machine stop, machine will be slowly running after separation, in case to keep the glue running
(9) Lamination unit: rolling gluing system –2 rubber cylinder and 1 anilox roller
(10) With independent motor and frequency conversion control, the paper tension can be adjustable by touch screen.
(11) Aluminium paper feeding shaft
(12) Speed: 0~150 meter/min
(13) With JOG and Emergency stop
(14) Power requires: 22KW
(15) Equipment size: 4200*1800*2200mm
(16) Weight: about 10 ton
